 |
 |
|
|
 |
|
|
|
|
|
JMR’s solubility for solvents differs for each series. A table of the solubilities for representative solvents is given below. |
|
|
|
|
|
|
Pure Solvent |
Organic Solvent/Water
(60/40) |
| Series |
Series |
| Solvent |
L |
M |
H |
HH |
L |
M |
H |
HH |
| Water (20ºC) |
 |
 |
|
|
– |
– |
– |
– |
Warm water
(50ºC to 60ºC) |
|
|
|
|
– |
– |
– |
– |
| Hot water |
|
|
|
|
– |
– |
– |
– |
| Methanol |
 |
 |
|
|
|
|
|
|
| Ethanol |
|
|
|
|
|
|
|
|
| Isopropanol |
|
|
|
|
|
|
|
|
| Acetone |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
: Complete dissolution, : Dispersion dissolution (with turbidity), : Undissolved |
|
|
|
|
 |
|
|
|
|
|
Except for the HH Series, JMR has thermal melting. The melting points, constant flow temperatures, decomposition start and decomposition end temperatures for representative products of each series are given in the following table.
|
|
|
|
|
|
|
Thermal Characteristics |
| Name |
Melting Point
[ºC]*1 |
Constant Flow Temperature
[ºC]*2 |
Decomposition Start Temperature
[ºC]*3 |
| L Series |
JMR-10L |
110 |
115 |
250 |
| JMR-20L |
120 |
125 |
250 |
| JMR-150L |
190 |
210 |
250 |
| M Series |
JMR-8M |
145 |
155 |
270 |
| JMR-10M |
156 |
160 |
270 |
| JMR-20M |
160 |
180 |
270 |
| H Series |
JMR-10H |
170 |
190 |
280 |
| JMR-20H |
180 |
210 |
280 |
|
|
|
|
|
|
*1 Measured using a Yanagimoto Fine Melting Point Measurement Unit.
*2 Measured at the temperature where the MFR is 10g/10 min at a load of 2.16 kgf.
*3 Read from a Thermo-Gravimetric Analysis (TGA). |
|
|
|
|
|
*JMR products with a variety of characteristics other than the above are also available upon request. |
|
|
 |
|
